Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Website

How do you actually feel on the subject of How to Install a Direct-to-Stud Shower Enclosure?

A successful shower setup requires cautious planning as well as a lot of work. Most of the times, you will require to do three sorts of tasks: mounting walls, mounting the plumbing, and ending up walls.

Prep work

Firstly, you need to decide on the type of shower that you desire to install. It is very important to identify whether the chosen shower is capable of managing certain systems as well as can regulate a risk-free degree of water through the central heating boiler. The majority of shower units nowadays are created to be adaptable to different water stress (such as saved hot water and also cold mains).
It is additionally important to consider the water pressure and also the planning of the piping as well as water drainage for the shower

Different Types of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be linked to the bathroom tap as per your demand, and also the water temperature can be changed by means of the faucets. Push-on mixers are cheap and incredibly basic to mount. However, although the hose connection is basic, it is conveniently dislodged. Additionally, it is troublesome to change the temperature level.

Bath/Shower Mixer: The tube and spray of this kind of shower are integrated with a bathroom mixer faucet, and also the temperature can be adjusted with the bathroom taps. It is a very inexpensive choice as well as no additional plumbing is entailed. Nonetheless, the bath/shower mixers additionally suffer from bothersome temperature level control alternatives.

Guidebook Mixer: The hose and spray of a manual mixer shower unit are a part of the wall unit and the hot and cold water supplies are connected to a single shutoff The temperature level and stress of the water are regulated via either one or a selection of handles (in extra pricey showers). Although temperature level control is a lot easier in hand-operated mixer kinds, they are a lot more costly than the previously discussed mixers. They likewise require additional plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall unit and the cold and hot water products are attached to a solitary valve here too. It is full with an integrated stabiliser to self-adjust the water temperature level as well as to prevent it from becoming too warm. Among the most significant advantages of a thermostatic mixer shower type consists of practical temperature control. However, it is one of the most pricey of the various mixer options.

Power Shower: A power shower is a single device consisting of a powerful electrical pump that is capable of altering both the water stress as well as temperature. This sort of shower can be fitted if there is supply of water from a cold water cistern and also a warm water cylinder. A power shower makes the change of both stress as well as temperature level very easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is supplied by a combination central heating boiler under mains stress.

Electric Shower: An electrical shower is plumbed into a keys cold water supply as well as it heats the water electrically. It is necessary to keep in mind that for this shower type to be mounted, the mains stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature and also stress to be adjusted using a knob. Versions with temperature stabilisers are better as they continue to be unaffected by various other taps in other places in use within the house. A major downside of electric showers is that the control handle only permits the choice of heats at less stress, or lower temperature levels at a higher stress. This is troublesome in the winter when the spray is typically weak and also the mains water is cooler. However, this issue is tackled in some designs which are available with a winter/summer setting.

Approach

Depending on the type of shower you desire to install, the shower head should either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check shutoff.
Before beginning, it is suggested to mark the placements of the shower head and control, as well as to intend the pipe-work involved. Furthermore, the water drainage system to remove the drainage will certainly need to be prepared. Both placements of the cable television path and also the shower switch will certainly additionally need to be thought about if a rapid or electric shower system is being mounted.
Make use of the instruction guide given with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is important to cut off the water system. In order to shield the pipes, they ought to be provided a water-proof covering as well as additionally fitted with isolating valves. The pipes can after that be hidden right into the wall and glued over to neaten the general appearance.
Fit the base tray, shower head, and also fittings.
Connect the primary shower control to the pipelines that will certainly be providing the water (This might call for a female screw thread adapter).
Reconnect the supply of water as well as examination the pipelines for any kind of leakages, as some might need tightening.
If you are installing an electrical shower, keep in mind to turn off the electrical energy supply prior to making any kind of electric links. When these links have actually been made (there need to be advice within the user's manual), the power supply can be switched over back on.

Adjusting Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a greater height (sometimes as little as 150mm (6inches)) by fitting a strong wooden assistance under it - perhaps made up of struts and also blockboards. If you pick this alternative, the major and also circulation pipelines will certainly likewise have to be increased to meet the new height of the storage tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it needs to be linked into the power supply in order to operate.

Piping and Water drainage

It is best to make use of 15mm size supply pipelines, as well as make the runs to the shower as short and also straight as possible so as to maintain optimal stress as well as minimise heat loss. Additionally, by reducing making use of arm joints for pipe corners, you can lower the resistance in the circulation of the water system. You can accomplish this by bending the pipelines rather.

Many Common Mistakes

Going against or neglecting regional code restrictions.

Using pipelines that are as well small.

Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your fixtures when mounting them.

Not setting up an air gap loading for components.

Cutting supply stub outs also brief to mount the shutoff valves onto after the completed wall remains in location.

Not properly lining up tubing right into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will create a leak.).

When transforming the water back on in your home, always run the outdoors hose shutoff or flush your commodes to bleed dust as well as air from the lines. This particles can trigger problems in your sink taps and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I am very eager about How to Install a One-Piece Shower Unit and I really hope you enjoyed our blog entry. Sharing is caring. Helping people is fun. I value reading our article about How to Install a One-Piece Shower Unit.

Contact Us Today

Report this page